Your cart is empty

TTA 2091

TTA 2091 B | Payload 2620 kg

Suitable for lifting and transport of multiple PVC pipes for glass fibre and other applications up to max. ring ø 3700 mm. Tilting frame operated via manual hydraulic pump. Tandem axle chassis with overrunning brake, height adjustable drawbar with ball- and DIN coupling, coupling height 400-1100 mm, TÜV approval if required, 80 km/h, lighting system 12 Volt, galvanized

Complete with standard equipment!


Optional Accessories
  • Straight drawbar with ball coupling
  • NATO coupling
  • Lighting system 24 Volt
  • Hydraulic lifting and lowering of cable drum by independent petrol engine, additional to standard hand pump
  • Hydraulic drum drive for reeling and unreeling of cable drum
  • Additional supply of all kinds of drive and lifting systems by power take-off from towing vehicle
  • Light metal axle with bush bearings, ø 75 mm, including fixing collars
  • Container steel body
  • Tube coil frame type „RAW 2200“
  • Transport and coiling device for 10 micro tube drums
  • Loading traverse for 9 micro tube drums
Name Payload (depends on the configuration) Empty weight Adm. Total weight Min. - Max. Drum-Ø Max. Drum width Length x Width x Height Purchase-No.
TTA 2091 B height
2620 kg
880 kg
3500 kg
1000 - 2800 mm
1600 mm
4800 x 2550 x 2560 mm
20262TA535B
− +
TTA 2091 B straight
2620 kg
880 kg
3500 kg
1000 - 2800 mm
1600 mm
4120 x 2550 x 2560 mm
20262TA535B/S2
− +
« previous next »

Related items

RAW 2200

Tube coil frame Type "RAW 2200"

For reeling PVC tube coils of pipe dia. 32, 40, 50 and 63 mm.

The frames may stationary be used or be transported within the a.m. cable drum transport trailer.


Basic frame
Welded out of stable quadrant hollow profiles.
It is equipped with feet having ground plates for stability.
On request transport wheel may be mounted.

Loading the bundle

Via a ramp the bundle is rolled into the frame.
The guiding rollers have to be fixed according the inner and outer diameter of the bundle.


Coil guidance
The loaded tube coil is guided at the outer and inner side by six adjustable rollers each. The rollers are running in ball bearings and may be adjusted in 50 mm steps to the corresponding inner and outer diameter of the tube coil.


Varnish
The frame and the adjustable guiding rollers are galvanized.
On requst, the frame can also be painted.
More...
Transport- and unreeling basket for tube coils

Transport- and unreeling basket for tube coils

With this stable basket your transport and laying problems with regard to bulky PE-HD pipes are solved.

The coils are loaded from the top or the rear. After opening the fixing bands the coil is easily to lay
because of the rollers running in ball bearings.

The rollers are adjustable to different tube coil diameters.

The basket is suitable for PE-HD tubes up to diameter 180 mm, length 300 m and max. tube coil diameter of 3700 mm.

Our advantes of the transport and unreeling basket:

  • Several supporting points of the pipe bundle by means of carrying rollers at the bottom and inside the pipe bundle.
  • The rollers are running in ball bearings. With these much rollers the deformation of the bundle is avoided.
  • Separating bar for stabilizing narrow tube bundles
  • Fixation of the inner tube bundle by lashing down with a pipe clip
  • The rollers are equipped with splint pins. Therefore, the shunting time is reduced
  • by abt. 60 % in comparison to the system using screwed rollers.
  • The basket can be tilted into the trailer even when already loaded
More...
TTA 2091 mit Ladetraverse

Loading traverse for 9 micro tube drums

Made of galvanized steel
More...
TTA 2091 with Transport and coiling device for 10 micro tube drums

Transport and coiling device for 10 micro tube drums

The frame is consisting of a galvanized steel construction and can be used

either stationary at site or inside our Cable drum transport and tube laying trailer Type TTA 2091 B.

It is equipped with extension adapter for drum supports, fixing collars and locking device inside the TTA 2091 B.

  • max. drum diameter: 1200 mm
  • max. drum width: 600 mm
More...
TTA 2091 mit Absetzmulde

Container for TTA 2091

Different executions from 1 up to 5 m³. Height of board 480 mm, for transport of mini-excavator
More...

Social Media

Imprint | Privacy Policy (GDPR)

Certificates

Zertifikat2023  ISO9001

Contact

Jakob Thaler GmbH
Kabelverlege- und Spulmaschinenfabrik
Hunenkamp 6-12
24576 Bad Bramstedt
Germany

Phone: +49 (0) 4192 / 81 601-0
Fax: +49 (0) 4192 / 81 601-60

Mail: info@jakobthaler.com

Monday - Thursday: 8:00 am - 4:30 pm
Friday: 8:00 am - 2:00 pm