Pipe Coil Trailer & Frames
Tube coil frame Type "RAW 2200"
For reeling PVC tube coils of pipe dia. 32, 40, 50 and 63 mm.
The frames may stationary be used or be transported within the a.m. cable drum transport trailer.
Basic frame
Welded out of stable quadrant hollow profiles.
It is equipped with feet having ground plates for stability.
On request transport wheel may be mounted.
Loading the bundle
Via a ramp the bundle is rolled into the frame.
The guiding rollers have to be fixed according the inner and outer diameter of the bundle.
Coil guidance
The loaded tube coil is guided at the outer and inner side by six adjustable rollers each. The rollers are running in ball bearings and may be adjusted in 50 mm steps to the corresponding inner and outer diameter of the tube coil.
Varnish
The frame and the adjustable guiding rollers are galvanized.
On requst, the frame can also be painted.
The frames may stationary be used or be transported within the a.m. cable drum transport trailer.
Basic frame
Welded out of stable quadrant hollow profiles.
It is equipped with feet having ground plates for stability.
On request transport wheel may be mounted.
Loading the bundle
Via a ramp the bundle is rolled into the frame.
The guiding rollers have to be fixed according the inner and outer diameter of the bundle.
Coil guidance
The loaded tube coil is guided at the outer and inner side by six adjustable rollers each. The rollers are running in ball bearings and may be adjusted in 50 mm steps to the corresponding inner and outer diameter of the tube coil.
Varnish
The frame and the adjustable guiding rollers are galvanized.
On requst, the frame can also be painted.
Transport- and unreeling basket for tube coils
With this stable basket your transport and laying problems with regard to bulky PE-HD pipes are solved.
The coils are loaded from the top or the rear. After opening the fixing bands the coil is easily to lay
because of the rollers running in ball bearings.
The rollers are adjustable to different tube coil diameters.
The basket is suitable for PE-HD tubes up to diameter 180 mm, length 300 m and max. tube coil diameter of 3700 mm.
Our advantes of the transport and unreeling basket:
The coils are loaded from the top or the rear. After opening the fixing bands the coil is easily to lay
because of the rollers running in ball bearings.
The rollers are adjustable to different tube coil diameters.
The basket is suitable for PE-HD tubes up to diameter 180 mm, length 300 m and max. tube coil diameter of 3700 mm.
Our advantes of the transport and unreeling basket:
- Several supporting points of the pipe bundle by means of carrying rollers at the bottom and inside the pipe bundle.
- The rollers are running in ball bearings. With these much rollers the deformation of the bundle is avoided.
- Separating bar for stabilizing narrow tube bundles
- Fixation of the inner tube bundle by lashing down with a pipe clip
- The rollers are equipped with splint pins. Therefore, the shunting time is reduced
- by abt. 60 % in comparison to the system using screwed rollers.
- The basket can be tilted into the trailer even when already loaded
Pipe Coil Trailer Type RVL 916 & 1616 Payload 900 kg & 1400 kg
Standard equipment
| Modell | RVL 916 | RVL 1616 |
|---|---|---|
| Payload | 900 kg | 1400 kg |
| Empty weight |
700 kg | 1100 kg |
| Adm. total weight | 1600 kg | 2500 kg |
| Min. - Max. pipe Coil-Ø | 1600 - 3750 mm | 1600 - 3750 mm |
| Max. pipe-Ø | 180 mm | 180 mm |
| Max. pipe coil width | 1100 mm | 1100 mm |
| Max. pipe length: (at Dia. 180 mm) |
100 m | 200 m |
| Drawbar | Straight with ball type coupling |
Straight with ball type coupling |
| Chassis | Single axle | Single axle |
| Max. speed | 80 km/h | 80 km/h |
| Varnish | Galvanized | Galvanized |
| Dimensions L x W x H |
4935 x 2300 x 2945 mm | 4935 x 2300 x 2945 mm |
Pipe Coil Trailer Type RVL 2021 Payload 1900 kg
Standard equipment
| Modell | RVL 2021 |
|---|---|
| Payload | 1900 kg |
| Empty weight |
1600 kg |
| Adm. total weight | 3500 kg |
| Min. - Max. pipe Coil-Ø | 1600 - 3700 mm |
| Max. pipe-Ø | 180 mm |
| Max. pipe coil width | 1680 mm |
| Max. pipe length: (at Dia. 180 mm) |
300 m |
| Drawbar | Height adjustable with ball type coupling |
| Chassis | Tandem |
| Max. speed | 80 km/h |
| Varnish | Galvanized |
| Dimensions L x W x H |
5845 x 2530 x 2992 mm |
TTA 5877 Combi Payload 6120 kg
Standard equipment
| Modell | TTA 5877 Combi |
|---|---|
|
Execution
|
hydraulic |
| Payload |
6120 kg |
| Empty Weight |
3000 kg |
| Adm. total weight |
9120 kg |
| Min. - Max. Drum-Ø |
2200 - 3700 mm |
| Max. Drum width |
1600 mm |
| Clear loading width | 1700 mm |
| Drawbar | height adjustable with ring eye coupling |
| Chassis | Single axle |
| Max. speed |
80 km/h |
| Varnish | RAL 2011 (orange) optional other colours |
| Dimensions L x W x H |
6300 x 2550 x 2600 mm |