Point Detection
Cable Pushing Devices
Pushing Device

This series of compact, lightweight and hydraulically driven cable pushers enhance cable installation distances and ease of use in traditional infrastructures such as trenches, ducts or tunnels. Combined with winching they reduce the stress of pulling while increasing cable life.
The hydraulic cable feeder is designed for laying cables or underground ducts in open trenches, ducts or tunnels for new installations or during repair work.
Its drive system, with belts or chains, ensures optimum pushing without damaging the cable. Its small size makes installation easy with a minimum of preparation work.
Combined with the use of a winch, it relieves the pulling force during installation allowing longer lengths or higher weights to be installed.
Type | DF 6 H | DF 6 H XL | DF 22 H |
---|---|---|---|
Cable-Ø
|
25-130 mm | 55-160 mm | 8-40 mm |
Drive | Hydraulic | ||
Pushing Force |
6000 daN | 6000 daN | 2000 daN |
Laying speed | 17 m/min | 17 m/min | 72 m/min |
Dimension | ca. 1160 x 380 x 835 mm | ca. 1160x 410x 880 mm | ca. 700 x 270 x 450 mm |
Weight | 106 kg | 108 kg | 26 kg |
Hydraulic power pack | Petrol, 6,3 kW | Petrol, 6,3 kW | Diesel, 5,0 kW |
Cable Laying Machine Cable Dog
The Thaler cable laying machine "Cable Dog" can be used as a pushing device in curved routes (without tractive force monitoring). Also set up to support the Thaler cable pulling winches at difficult to move points in the laying route, they fulfil important tasks through their pushing function. The endless conveyor back is equipped with 14 rubberised driver forks, 6 of which are permanently engaged.
Standard equipment
Model | Cable Dog with petrol engine | Cable Dog with electric engine |
---|---|---|
Engine Power
|
3 kW | 3 kW |
Pushing force |
800 daN | 800 daN |
Dimensions | approx. 1150 x 450 x 950 mm | approx. 1150 x 450 x 1050 mm |
Height of chain drive | approx. 320 mm | approx. 320 mm |
Laying Speed |
0-11 m/min | 0-11 m/min |
Painting | RAL 5015 (blue) | RAL 5015 (blue) |