TTA 2091 B with hydraulic drum drive for reeling and unreeling, including lifting and lowering of cable drum by engine
TTA 2091 B with straight drawbar with lifting and lowering of cable drum by engine

TTA 2091 B

Hydraulic version, loading capacity 2620 kg

Suitable for lifting and transport of multiple PVC pipes for glass fibre and other applications up to max. ring ø 3700 mm. Tilting frame operated via manual hydraulic pump. Tandem axle chassis with overrunning brake, height adjustable drawbar with ball- and DIN coupling, coupling height 400-1100 mm, TÜV approval if required, 80 km/h, lighting system 12 Volt, galvanized
Complete with standard equipment!

Picture above: TTA 2091 B with height adjustable drawbar, hydraulic drum drive for reeling and unreeling, including lifting and lowering of cable drum by engine
Picture below: TTA 2091 B with straight drawbar and lifting and lowering of cable drum by engine

Optional Accessories

  • Straight drawbar with ball coupling
  • NATO coupling
  • Lighting system 24 Volt
  • Hydraulic lifting and lowering of cable drum by independent petrol engine, additional to standard hand pump
  • Hydraulic drum drive for reeling and unreeling of cable drum
  • Additional supply of all kinds of drive and lifting systems by power take-off from towing vehicle
  • Light metal axle with bush bearings, ø 75 mm, including fixing collars
  • Container steel body
  • Tube coil frame type „RAW 2200“
  • Transport and coiling device for 10 micro tube drums
  • Loading traverse for 9 micro tube drums
Type Loading capacity Empty weight Adm. total weight Min. - Max. Drum ø Max. Drum Width Drawbar Length Width Height
TTA 2091 B 2620 kg 880 kg 3500 kg 1000 - 2800 mm 1600 mm height adjustable 4660 mm 2550 mm 2060 mm


Optional Equipment for TTA 2091

Loading traverse for 9 micro tube drumsLoading traverse for 9 micro tube drums
Made of galvanized steel

Purchase-No.: A 535-69.10-00/5


Transport and coiling device for 10 micro tube drumsTransport and coiling device for 10 micro tube drums
The frame is consisting of a galvanized steel construction and can be used
either stationary at site or inside our Cable drum transport and tube laying trailer Type TTA 2091 B.
It is equipped with extension adapter for drum supports, fixing collars and locking device inside the TTA 2091 B.

  • max. drum diameter: 1200 mm
  • max. drum width: 600 mm

Purchase-No.: A 535-69.11-00/0


TTA 2091 mit Transport- und Abrollkorb

Transport and Unreeling basket for PVC tube coils
With this stable basket your transport and laying problems with regard to bulky PE-HD pipes are solved.
The coils are loaded from the top or the rear. After opening the fixing bands the coil is easily to lay
because of the rollers running in ball bearings.
The rollers are adjustable to different tube coil diameters.
The basket is suitable for PE-HD tubes up to diameter 180 mm, length 300 m and max. tube coil diameter of 3700 mm.

Our advantes of the transport and unreeling basket:

  • Several supporting points of the pipe bundle by means of carrying rollers at the bottom and inside the pipe bundle.
    The rollers are running in ball bearings. With these much rollers the deformation of the bundle is avoided.
  • Separating bar for stabilizing narrow tube bundles
  • Fixation of the inner tube bundle by lashing down with a pipe clip
  • The rollers are equipped with splint pins. Therefore, the shunting time is reduced
    by abt. 60 % in comparison to the system using screwed rollers.
  • The basket can be tilted into the trailer even when already loaded

Technical Data;

  • Length: 4.450 mm
  • Width: 1.940 mm
  • Height: 2.350 mm
  • max. tube coil diameter: 3.700 mm
  • Cleasr loading width: 1.500 mm
  • Weight: ca. 450 kg

Purchase-No.: A 535-100.00-00/0


Transport- and unreeling basket for tube coils, mounted on a trailerTransport- and unreeling basket for tube coils, mounted on a trailer with tandem-axle
The transport- and unreeling basket can be taken off and the trailer is
equipped with the ramps to transport miniexcavators etc.


RAW 2200

Tube coil frame Type "RAW 2200"
For reeling PVC tube coils of pipe dia. 32, 40, 50 and 63 mm.
The frames may stationary be used or be transported within the a.m. cable drum transport trailer.

Basic frame
Welded out of stable quadrant hollow profiles.
It is equipped with feet having ground plates for stability.
On request transport wheel may be mounted.

Loading the bundle
Via a ramp the bundle is rolled into the frame.
The guiding rollers have to be fixed according the inner and outer diameter of the bundle.

Coil guidance
The loaded tube coil is guided at the outer and inner side by six adjustable rollers each. The rollers are running in ball bearings and may be adjusted in 50 mm steps to the corresponding inner and outer diameter of the tube coil.

Varnish
The frame and the adjustable guiding rollers are galvanized.
On requst, the frame can also be painted.

Technical Data:

  • max. tube coil diameter: 2200 mm
  • max. tube coil width: 500 mm
  • max. tube coil weight: 150 kg
  • Total height: 2265 mm
  • Total width: 640 mm
  • Total length: 2500 mm
  • Weight: 138 kg
  • Diameter of the guiding rollers: 60 mm

Purchase-No.: A 478-00.00-00/0


Container for TTA 2091TTA 2091 with Container 1 up to 5m³
height of board 400 mm, for transport of mini-excavator