MULTI Blower - Fibre Blowing Machine for mini- and fibre optic cable Ø 4-35 mm and micro pipes

MULTI-Blower


The closing/clamping pressure on the cable is continuously adjustable. The feed force will be adjusted by a precisely pressure controller. Length and speed of the are shown in the display of the machine.

The MULTI Blower can be pre-equipped for recording (Thaler-LOG or TFC1) by request.

The MULTI Blower is approved by German Telecom - ZTV TKNetz 40.

Technical Data:
Cable Diameter: 4,0 - 35,0 mm
Tube bundles (Optional Equipment): 3x10 / 5x10 / 7x10
(further combinations on request)
Pipe diameter: 10,0 - 63,0 mm
Cable speed: max. 120 m / min.
Pushing force: 1.200 N
Air pressure: max. 16 bar
Supply: Pneumatic
Dimensions MULTI Blower: 700x300x310 mm, 28 kg
Dimensions Transport Box with Blower: 800x580x420 mm, ca.36 kg
The machine is equipped with a drive belt for cable-Ø 4-35 mm. The basic price does not cover cable guides and pipe clamps and have to be configured separately. They can be stored in the transport box and be chances without using tools.

Configuration possibilities:

Micro Blower mit Thaler Log

Cable Blowing Control Device
Thaler-LOG

The Thaler-LOG records the full blowing process. All relevant data (cab-le- and duct parameter) are entered on a tablet, which is included in the delivery. Latest data will be saved automatica ly in Thaler-LOG. Therefore, the data do not have to be entered again at the next blowing process. Cable and duct parameter are set up and saved in tables before. They can be extended without using any software.

Additionally, pressure, speed and pushing force are illustrated on graphs. Outline of the data takes place by meter. The log will be created after finishing the blowing process.

The Thaler-LOG System is approved by German Telecom - ZTV TKNetz 40.


Rohrklemmen für Multi Blower

Duct Clamps
Pipe-Ø Max. Cable-Ø Purchase No.
10 mm   8 mm 080-7932-1008
12 mm 10 mm 080-7932-1210
14 mm 10 mm 080-7932-1410
16 mm 10 mm  080-7932-1610
18 mm 10 mm  080-7932-1810
20 mm 10 mm  080-7932-2010
25 mm 10 mm  080-7932-2510
32 mm 10 mm  080-7932-3210
40 mm 10 mm  080-7932-4010

Pipe-Ø Max. Cable-Ø Purchase No.
20 mm 16 mm 080-7932-2016
25 mm 16 mm 080-7932-2516
32 mm 16 mm 080-7932-3216
40 mm 16 mm  080-7932-4016

Pipe-Ø Max. Cable-Ø Purchase No.
32 mm 20 mm 080-7932-3220
40 mm 22 mm 080-7932-4022
50 mm 22 mm 080-7932-5022


Kabeldichtungen für Mini Blower

Cable seals
Cable-Ø Purchase No.
  4,0 mm 080-7933-1640
  5,0 mm 080-7933-1650
  6,0 mm 080-7933-1660
  7,0 mm 080-7933-1670
  8,0 mm 080-7933-1680
  9,0 mm 080-7933-1690
10,0 mm 080-7933-2210
11,0 mm 080-7933-2211
12,0 mm 080-7933-2212
13,0 mm 080-7933-2213
14,0 mm 080-7933-2214
15,0 mm 080-7933-2215

Kabeldichtungen (teilbar) für MINI Blower

Cable seals (divisible)
Cable-Ø Purchase No.
4,0 mm 080-7934-1640
5,0 mm 080-7934-1650
6,0 mm 080-7934-1660
7,0 mm 080-7934-1670
8,0 mm 080-7934-1680
9,0 mm 080-7934-1690

Kabelführung (Eingangsseite) für MINI Blower

Cable guide (entrance side)
Cable-Ø Purchase No.
up to 15,0 mm 080-7932-042
up to 22,0 mm 080-7932-040

Antriebsriemen für Multi Blower

Drive Belt
Cable-Ø Purchase No.
6,0 bis 35,0 mm 080-7932-030

Kabelfuehrungsspitzen

Cable guide bullets
For Cable-Ø Purchase-No.
2,0 mm A 199-14.01-00/0
2,5 mm A 199-14.02-00/0
3,0 mm A 199-14.14-00/0
4,0 mm A 199-14.03-00/0
5,0 mm A 199-14.04-00/0
6,0 mm A 199-14.06-00/0

Kolbenschwaemme

Cleaning Sponge
1 PK = 25 Pcs.
Pipe Outer-Ø-Ø Purchase-No.
  7,0 - 10,0 mm 080-7301-041
10,0 - 16,0 mm 080-7301-043


Kabeltrommelbock für LWL-Kabel, 500 kg dynamischKabeltrommelbock für LWL-Kabel, 700 kg dynamisch

Cable drum trestle for fibre-optic cable

with mechanical brake sys-tem, with drum axle Ø 40 mm.

  Small drum trestle Big drum trestle
Carrying capacity  500 kg, dynamic 700 kg, dynamic
Drum axle Ø 40 mm 40 mm
Max. drum Ø 1000 mm 1400 mm
Max. drum width 600 mm 1000 mm
Max. centre hole 100 mm 100 mm
Purchase-No. Z 618-01.00-00/0 Z 618-02.00-00/0

Mechanischer Kabeltrommelbock

Mechanical drum trestle

adjustable supporting pockets with ball bearings,
two cones and one axle Ø 48 mm,
demountable and galvanized frame.
A disc brake is optionally available.

Carrying capacity: 1.600 kg
Max. Drum-Ø: 1600 mm
Max. Drum width: 1200 mm
Axle-Ø: 48 mm
Weight Axle:  17 kg
Weight Trestl:e 46 kg
   
Bestell-Nr. 080-3111-010

Schlaufenkorb

Cable basket for minicable

for cable-Ø 4-8 mm, painted, dismountable

  • Cable capacity for Ø 4,0mm | Length: 6000m
  • Cable capacity for Ø 6,0mm | Length: 3000m
  • Cable capacity for Ø 7,5mm | Length: 2500m
  • Cable capacity for Ø 8,0mm | Length: 2000m
  • Diameter: 1200 mm
  • Length: 1250 mm
  • Width: 1250 mm
  • Higth: 1250 mm
  • Weight: 45 kg

Purchase-No. 095-2000-137


Gliding means "Gliss-F"

Gliding means for micro tube laying, 25 l can


Purchase-No. 090-9155-430


Kaeser Kompressor M17

Kaeser Compressor M17

for blowing in mini- and micro cables

  • Petrol engine
  • Air volume: 1,0 m³/min.
  • Working pressure: up to 15 bar
  • Cover Hood: PE
  • Compressed-air conditioning A, After cooler + cyclone separator
  • Weight: 204 kg

Kaeser M125

Kaeser Compressor M125

for blowing-in fiber optic cables

  • Diesel engine
  • FAD: 10,5 m³/min.
  • Working pressure: 6-14 bar
  • Chassis: height adjustable drawbar and overrunning brake
  • lighting system: 12 V
  • non-return valve
  • Compressed-air conditioning A, consist of: after cooler + cyclon seperator
  • Weight: 2.116 kg